GTA 6’s Display tab is worth more than a quick glance before returning to Leonida. It includes ordinary screen-fit controls alongside options that alter visual clarity, on-screen alerts, the presentation of violence and the response to flashbangs. Some are entirely about personal comfort; others can make important information easier—or harder—to pick out during play.

On PS5, pause the game, open Settings, and use R1 to reach Display. On Xbox, use RB instead. The strongest all-purpose starting point is simple: calibrate brightness as instructed, leave Safe Zone alone unless the screen is cropped, keep useful alert effects high enough to notice, reduce motion blur if it feels unpleasant, leave Brightness Reduction off unless bright lights are specifically a problem, and experiment with High Contrast Shaders when visual readability takes priority.

None of those choices has to be permanent. This menu is designed around preference, and a setting that makes the game more comfortable for one player can be distracting for another. The practical trick is to know which controls change the image itself, which affect feedback during action, and which are accessibility tools.

How to reach GTA 6’s Display settings

  1. Pause GTA 6 during gameplay.
  2. Select Settings.
  3. Move across to the Display tab with R1 on PS5 or RB on Xbox.

The choices in this tab are mostly presentation settings rather than broad performance controls. That distinction matters: the menu offers ways to tailor what is shown on-screen, but it is not a large bank of technical graphics controls. Players looking to adjust how GTA 6 feels from the camera perspective should also see our guide to what first-person mode can and can’t do in Leonida.

Brightness Calibration: follow the logo test

Recommended setting: adjust until the Rockstar logo is barely visible.

Brightness Calibration establishes the baseline for the game’s image. GTA 6 provides its own visual target: move the slider until the Rockstar logo is only just visible. That instruction is a better starting point than simply raising brightness until every dark area appears fully illuminated.

It can be tempting to push brightness upward in the belief that it will reveal more of the world. The trade-off is that an overly bright image can flatten the intended difference between darker and brighter areas. The calibration prompt provides a built-in reference point, so use it first before changing anything else.

If the game later feels too dark or too bright in your particular setup, return to this screen and make a small adjustment rather than radically shifting several display settings at once. Changing one variable at a time makes it easier to identify what actually helped.

Related coverage includes GTA 6 Display Settings Guide: Motion Blur, Brightness Reduction, High Contrast, and More.

Safe Zone: only change it when the interface is being cut off

Recommended setting: default, unless content at the edges of the image is cropped.

Safe Zone governs the usable borders of the displayed image. It is not a brightness, resolution or visual-detail option. Instead, it makes sure the corners of GTA 6’s presentation fit within the visible area of the display.

If every part of the HUD and picture is visible, leaving Safe Zone at its initial setting is the cleanest choice. If the game’s outer elements are cut off, use the D-pad to adjust the boundary until the white corner markers can just be seen. The goal is not to shrink the picture more than necessary; it is to recover any interface elements that are outside the visible screen.

Status, hit and awareness effects: visual alerts versus a quieter screen

GTA 6 separates several screen-feedback settings into three controls:

  • Player Status Effects Intensity
  • Hit Effects Intensity
  • Awareness Effects Intensity

These settings regulate the intensity of visual effects that communicate what is happening to the player character or in the immediate situation. In plain terms, they are feedback tools: the game uses visual cues to flag status changes, hits and awareness-related events.

Recommended setting: keep them high if fast visual feedback helps you react; lower them if they obscure the action or distract you. Higher intensity makes those alerts more pronounced, while lower values create a less busy screen. The trade-off is important. Reducing the cues may make the screen calmer, but it can also mean less immediate warning when something demands attention.

There is no universally correct number here. A player who values quick reactions may prefer prominent effects. Someone who finds layered screen effects overwhelming may prefer a reduced level. Try lowering one category before dropping all three; that approach preserves the types of feedback you still find useful.

Motion Blur: a camera-movement effect, not extra sharpness

Recommended setting: 0 or 1 for players who dislike blur or find it uncomfortable; raise it only if you prefer the effect.

Motion blur adds blur to the surroundings when the camera or character moves quickly. It is an aesthetic effect intended to change the sensation of fast movement. It does not make the world inherently more detailed, and turning it down is a direct way to keep the picture clearer while panning the camera or moving at speed.

This is among the most personal settings in the menu. Some players enjoy the softer movement presentation, while others find it distracting or uncomfortable. GTA 6 allows the value to be brought down to 1 or switched off at 0, making a low setting a sensible starting point for anyone who notices the blur immediately.

For a useful comparison, play briefly with the setting at a low value, then raise it and repeat the same sort of camera movement. Look for whether the effect improves the presentation for you or merely makes it harder to parse motion. Keep the choice that feels clearer and more comfortable rather than treating a particular number as mandatory.

Dismemberment, blood and gore: tailor the level of graphic content

The Display menu also contains content-presentation options for violence. Dismemberment is a toggle that controls whether limbs can be shown being removed by certain injuries. Blood and Gore Intensity is a separate slider that controls the amount of blood shown.

Blood and Gore Intensity starts at 3/3. It can be reduced to limit the blood, or lowered to disable it altogether. Dismemberment can likewise be switched off independently.

Recommended setting: use the defaults only if you are comfortable with graphic violence; lower either option that makes the game unpleasant to watch. These controls do not need to move together. A player could reduce blood while leaving Dismemberment enabled, or turn off Dismemberment and retain a different blood setting. Separating them gives players more precise control over what they want to see.

Flashbang effect: choose bright or dark for the screen response

Flashbangs can be set to produce either a bright or dark screen effect. The bright choice whites out the screen when the character is flashbanged; the dark choice creates the opposite response.

Recommended setting: Dark for players avoiding an abrupt bright flash, particularly during night-time play; Bright only if that is the effect you prefer.

This is a focused comfort option with a clear consequence. It does not remove the flashbang event; it changes the visual treatment of the moment. The dark setting is particularly useful for someone who does not want a sudden bright TV image in a darker room. As with Motion Blur, preference and comfort should decide the setting.

Brightness Reduction: useful in a narrow situation, but visually transformative

Recommended setting: Off unless bright in-game lights are specifically causing a problem.

Brightness Reduction is arguably the menu’s most consequential image-altering option. It applies a filter to the world that softens bright lights while leaving the HUD unaffected. The HUD, or heads-up display, is the on-screen interface layer that provides gameplay information; this setting targets the world image rather than dimming that interface.

That sounds straightforward, but it comes with a substantial visual change. Brightness Reduction can make GTA 6’s world look washed out or blown out, rather than simply delivering a subtle reduction in glare. It is therefore not a general replacement for proper Brightness Calibration.

The game asks for confirmation when the option is activated, appropriately signaling that this is not a minor tweak. Consider it a targeted accommodation for players who need bright world lights softened, not the default choice for everyone. If the game’s image looks noticeably less appealing after it is enabled, switch it off and revisit normal brightness calibration instead.

High Contrast Shaders: the most flexible visibility tool

Recommended setting: turn them on when you need clearer identification of characters or objects, then adjust individual categories and opacity to reduce visual clutter.

High Contrast Shaders are an accessibility feature designed to make key elements easier to distinguish in GTA 6’s visually dense environments. A shader is a visual treatment applied to an object or character. Here, the treatment adds strong color identification to important categories:

  • Player: yellow
  • Allies: blue
  • Enemies: red
  • Interactive objects: gray

Enabling the option turns on all of these shader categories by default, but each can then be toggled individually. That granularity is the strength of the feature. Someone might want stronger distinction for enemies and interactive objects, for example, without applying every possible overlay to the scene.

The menu also offers fill opacity, which changes how solid or pronounced the colored fill appears. Lowering opacity is the natural next step if the default shader presentation is useful but feels too visually forceful. This makes the tool more adaptable than a simple on/off accessibility switch.

For players with visual impairments, the shaders can make it easier to locate the player character, allies, enemies and things that can be interacted with. They can also be a practical option for any player who has trouble separating these categories amid a busy scene. The cost is that the original look of the world becomes more stylized, so it is worth balancing readability against how much color overlay you want on-screen.

A practical GTA 6 Display setup to start with

If you want one balanced baseline rather than testing every slider at once, use this sequence:

  1. Set Brightness Calibration so the Rockstar logo is barely visible.
  2. Leave Safe Zone at default unless image edges are cropped.
  3. Keep status, hit and awareness effects high enough to remain noticeable, then reduce only the ones that distract you.
  4. Set Motion Blur to 0 or 1 if you favor clear movement; increase it only if you actively like the blur effect.
  5. Choose your own comfort level for Dismemberment and Blood and Gore Intensity.
  6. Set flashbangs to Dark if a sudden white screen is unwelcome.
  7. Keep Brightness Reduction off unless intense bright lights need to be softened.
  8. Use High Contrast Shaders selectively, and lower fill opacity if the colors are too harsh.

The central lesson is that GTA 6’s Display options serve different jobs. Brightness Calibration and Safe Zone establish a correct foundation. Motion Blur, flashbang response and graphic-content controls address personal comfort. Screen-effect intensity and High Contrast Shaders affect how quickly information stands out during play. Once those categories are separated, the menu becomes much easier to tune without accidentally trading a clearer picture for a less readable one.