An iPad that will not start normally can feel dramatically more broken than it really is. A failed software update, repeated rebooting, too many incorrect passcode attempts, or a prompt telling you to connect the tablet to a computer can all interrupt ordinary use. When a routine restart is not enough, recovery mode gives the iPad a path to communicate with a Mac or PC for software repair.

Recovery mode should not be the first response to every glitch. It is a more serious troubleshooting step meant for situations in which iPadOS cannot get back to normal operation. But it offers two importantly different actions: an attempt to update iPadOS without disturbing the data on the device, and a factory restore that erases the iPad if updating cannot solve the problem.

The safest principle is simple: try Update first, and reserve Restore for when Update fails. That distinction is especially important for anyone with local files, games, captures, apps, or other information that is not safely represented in a recent backup.

What recovery mode does

Recovery mode is a special state that lets an iPad work with software on a connected computer. On a Mac, that software is Finder. On a PC, it is the Apple Devices app. Once the computer detects an iPad in recovery mode, it presents options to update or restore it.

This can help when a major software update has only partially installed and leaves the device unable to boot, when the tablet repeatedly restarts, when the computer no longer recognizes it in ordinary use, or when the iPad itself displays the computer-and-cable recovery screen. It may also be useful after too many incorrect passcode attempts have locked the device.

In practical terms, recovery mode is not a shortcut around the iPad’s normal setup or security process. It is a recovery route for the operating system. The computer is used to reinstall iPadOS through the connection rather than relying on the iPad being able to launch normally on its own.

Before you begin

You need a USB cable, the iPad, and a computer. Connect the iPad to the computer with the cable, then open the appropriate app before starting the button sequence:

  • Mac: Open Finder.
  • PC: Open the Apple Devices app.

The recovery procedure depends on one hardware detail: whether the iPad has a physical Home button. A Home button is the round button on the front of older designs. iPads without one use a sequence involving the volume buttons and the power button instead. Newer models such as iPad Pro fall into the no-Home-button group.

Related coverage includes How to Put an iPad in Recovery Mode With or Without a Home Button.

Do not let the appearance of the Apple logo convince you the sequence is complete. In both methods, the important endpoint is the recovery mode icon, shown as a USB cable connecting to a computer. Keep following the required button hold until that screen appears.

Put an iPad with a Home button into recovery mode

  1. Connect the iPad to the computer using a USB cable.
  2. Open Finder on a Mac, or Apple Devices on a PC.
  3. Press and hold the Home button and the power button at the same time.
  4. Continue holding. The screen will go black, then the Apple logo will appear.
  5. Keep holding until the recovery mode icon appears: a cable connected to a computer.
  6. Release the buttons once that icon is on screen.

The key here is persistence. The Apple logo is an intermediate part of the process, not the signal to release the buttons. The recovery icon is the confirmation that the iPad has entered the needed mode.

Put an iPad without a Home button into recovery mode

  1. Connect the iPad to the computer using a USB cable.
  2. Open Finder on a Mac, or Apple Devices on a PC.
  3. Press and release Volume Up.
  4. Press and release Volume Down.
  5. Press and hold the power button.
  6. Keep holding it through the appearance of the Apple logo.
  7. Release the power button only after the recovery mode icon, showing a cable connected to a computer, appears.

This is an ordered sequence, rather than a simultaneous button hold. The volume-up press comes first, the volume-down press second, and the long power-button hold finishes the process. Again, the goal is the recovery screen, not merely the Apple logo.

Choose Update before Restore

Once recovery mode is active, Finder or Apple Devices should find the iPad and display a message explaining that it needs to be updated or restored. The first option to choose is Update.

Update asks the computer to reinstall iPadOS while leaving other content on the device unaffected. If it succeeds, the iPad should become usable again without the disruption of wiping its existing data. For a device affected by a bad or incomplete operating-system update, this is the preferable result: repair the software layer first and avoid turning a software problem into a data-loss event.

It is helpful to understand the terminology here. iPadOS is the operating system that runs the iPad. Reinstalling it is an attempt to replace or repair the software needed for the tablet to start and run. The supplied recovery process describes Update as the option that does this without affecting the rest of what is stored on the iPad.

Keeping Mac software current can matter in adjacent troubleshooting situations, too. For more on controls being developed around software access on Apple computers, see the changes described for macOS 27.3 beta.

When Restore becomes necessary

If Update does not work, put the iPad back into recovery mode using the same button process and select Restore. This is the more consequential option. Restoring returns the iPad to factory settings and completely erases its data.

That is why Restore is a last resort rather than the default selection. It can return a non-working device to a clean starting point, but the trade-off is significant. A later restoration from the most recent backup may bring data back, provided a usable backup exists and there is enough iCloud storage, yet this is still more disruptive than a successful Update.

A quick decision checklist

  • The iPad is behaving oddly but can still operate: try a normal restart before considering recovery mode.
  • The iPad is stuck after a major update, loops through reboots, is locked out, cannot be recognized by the computer, or shows the cable-to-computer screen: recovery mode may be appropriate.
  • The computer offers Update or Restore: choose Update first.
  • Update fails: re-enter recovery mode and use Restore only if you accept that it will erase the device.
  • Neither option resolves the issue, or recovery mode cannot be entered: professional repair or replacing the iPad may be the next step.

Why the order matters

The central risk in recovery-mode troubleshooting is treating Update and Restore as interchangeable. They are not. Update is an effort to reinstall iPadOS and preserve what is already on the tablet. Restore is a factory reset. Both may be valuable in the right situation, but their consequences for data are very different.

For that reason, the process is best approached as an escalation: cable and computer first, correct button sequence second, Update as the initial repair attempt, and Restore only if the less destructive path cannot recover the iPad. If recovery mode itself will not work, repeated button attempts are not a substitute for getting the device assessed. At that point, the issue may require professional help.

A frozen or looping tablet is frustrating, but it is not automatically a permanently unusable one. Recovery mode exists precisely for the cases where iPadOS needs help getting back on its feet—and careful use of the Update option offers the best chance of doing that without sacrificing the data already on the device.