Support for HOS 23.5.0
hekate 6.5.5 and its Nyx 1.9.5 graphical interface now support Nintendo Switch system software version 23.5.0. The update also extends that support to emuMMC, the project’s separate system-storage environment for custom firmware setups.
The release supports booting current custom firmware environments, Android, Linux and payload tools. Those capabilities are part of the broader hekate and Nyx feature set rather than new additions in this version. The documented change here is compatibility with HOS 23.5.0 across hekate, emuMMC handling and Nyx.
FAT32 NOGC correction
The package was updated to correct a FAT32 NOGC issue. NOGC is the safeguard used by hekate to prevent certain cartridge-slot firmware updates when the relevant fuses have not been burned. For users booting a supported Switch system from a FAT32 card, this is the most specific functional fix called out in the release notes.
The release notes also state that the update removes the need for SD card removals in the relevant workflow, although they do not provide further technical detail about that behavior.
What hekate and Nyx provide
hekate is a graphical Nintendo Switch bootloader and firmware-patching environment. Nyx supplies its touchscreen- and Joy-Con-friendly interface, with configurable themes, launch entries and settings. Together, they can present boot options for custom firmware, official firmware configurations, Android, Linux and standalone payload tools.
The software also includes tools for creating, migrating and managing emuMMC environments; backing up and restoring eMMC, emuMMC and related storage; managing SD card partitions; and using the Switch as a USB mass-storage device for supported storage areas. Additional utilities include hardware information, touch calibration, an archive-bit fixer, AutoRCM controls and storage benchmarking.
The SD Card Partition Manager can prepare a card for combinations of Switch system storage, Android and Linux. The release FAQ specifically lists Ubuntu Bionic 3.4.0 or newer, or another supported L4T Linux distribution, and Android 11 for legacy layouts or Android 13 and 14 for dynamic layouts. It can also reformat a card as a single FAT32 partition, including conversion from exFAT to FAT32. The notes recommend formatting through hekate because the process is intended to prepare the card for performance.
Updating an existing setup
The documented update method is to copy the new bootloader folder to the root of the SD card and merge or replace existing files. The folder does not need to be deleted first, which preserves existing configurations and payloads when the files are merged.
The package includes update.bin inside the bootloader folder. When it is newer, hekate checks and loads it automatically, including on setups that use a modchip. Updating the separate RCM injection device or PC payload is optional according to the release instructions; users can use the supplied hekate_ctcaer_6.5.5.bin file if they choose to update that component as well.
The release is tagged v6.5.5 and includes Nyx v1.9.5. Available assets include a combined hekate and Nyx archive, standalone payload files, an 8GB variant, scripts for Windows, Linux and macOS, and a Windows registry file for USB transfer tuning.
USB mass-storage note for Windows
For maximum USB mass-storage performance on Windows, the release notes instruct users to run nyx_usb_max_rate__run_only_once_per_windows_pc.reg once on each Windows PC. The setting affects hekate’s USB device. Linux and macOS users do not need this registry file, and the notes say its contents can be inspected with a text editor before it is used.




